Back

BST Carbon Fiber Wheels - Yamaha R6 (2004-2007)

Tap for gallery

€2,635.93

This product is currently out of stock


Product Information
Specification

BST Carbon Fiber Wheels - Yamaha R6 (2004-2007)

The BST 5spoke carbon composite wheel is made using the latest technology, materials and manufacturing processes. This lightweight and exceedingly strong wheel is suitable for both racing and street racing use. The wheels have been tested at Rim Technology, Eurotype Test Centre and German TUV, and passed all the tests for road certification. And most important of all, our wheels are unique in that they are created as a single unit - we dont bond pieces together.

  • Set includes Front and Rear Wheels
  • Unique - monococque (single unit) design with 5 hollow spokes and are suitable for both street and race use.
  • Save you anything between 40- 60 per cent in weight, and more importantly, are designed to deliver the lowest Moment of Inertia - the critical factor that affects the performance of the bike.
  • Engineered with carbon fibre and maximise on its properties of high strength and low weight.  We have reduced the weight in the spokes and rim without compromising strength. The weight is therefore concentrated in the hub, which means that rotational inertia is reduced, making the bike easier to handle, and allowing you to accelerate quicker and brake later. So not only is the wheel lighter, but it is engineered for maximum performance.
  • Entire process is managed under ISO9002 standards. BST design the tooling, moulds, wheel and the hubs and manufacture them onsite. Cutting machines such as those used in the aeronautical industry ensure that the process is guaranteed and repeatable to certified high standards. Layup is done in a clean room (dust-free, temperature controlled).
  • Wheels are cured in an Autoclave at 125 degrees C and 6 bar of pressure. This ensures the best compaction and surface finish.
  • Carbon fibre that BST use is a woven and unidirectional format, and is embedded in a resin matrix made from toughened epoxy. Pre-preg is used as the machine application of the specific resin systems ensures the most controlled and even application and therefore the highest quality material for use in the BST wheels.
  • TUV certification for wheels (GSXR1000 front and rears, Ducati 916-998 series and 748 fronts and rears, others in process)
  • DoT and JWL compliant
  • Aerospace FAR25 qualified materials
  • Manufacturing facility is TUV certified, and ISO 9002 compliant
  • Complete traceability in manufacturing process and materials used including the hubs
  • Manufacturing process allows for full identification (each has its own Serial No) and traceability (based on the process used for critical parts in the aerospace industry)
  • Nesting and cutting machines are the same as those used in the aerospace industry - each wheel pattern is cut and the part is numbered simultaneously guaranteeing correctness and uniformity
  • Wheels passed all tests for road certification carried out by Rim Technology (UK government certified facility) and Investmech test center.
  • Corner fatigue carried out as specified in BS. AU. 50.
  • Radial fatigue carried out as specified in BS. AU. 50.
  • Torsional fatigue carried out as specified in BS. AU. 50.
  • Impact test carried out as specified in JWL

Product CodeBSTK310
ConditionNew
Weight20lb

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.
Top

eCommerce by CubeCart